Unico M1218 1 to 1-1/2 Ton Air Handler - Blower Only (Standard) - Equipment - Unico - High Velocity hvac

Unico M1218 1 to 1-1/2 Ton Air Handler - Blower Only (Standard)

$933.45

Unico M1218 1 to 1-1/2 Ton Air Handler - Blower Only (Standard)

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

Product Description

This a 1 to 1-1/2 ton Air Handler from Unico. The Unico M1218 Air Handler unit is a single packaged unit. The cooling and heating coils are contained within the same cabinet. The unit can be mounted in a verticalupflow or horizontal-flow configuration. The coils can be combined as a heating-only, cooling-only, or heating andcooling fan coil unit. For cooling, the M1218 offers a choice between R-22 or R-410A refrigerant (both A/C and Heat Pump) or a chilled water coil. For heating, the M1218 offers an optional hot water, or you may use the installed heat pump coil or chilled water coil (using hot water), or you may use an electric heater (WON 0502 or WON 0752). The M1218 is designed to deliver up to 350 CFM (0.17 m3/s) of air with a static pressure of 1.5 inches of water 373 Pa). The minimum airflow for refrigerant systems is 200 CFM per nominal ton (27 L/s per nominal kW).

Features and Controls
Unico designed and built blowers feature direct drive motors that are located in the air stream. Each blower wheel is balanced to Unico specifications. The blowers are capable of generating external pressures up to 1.5 inches of water (373 Pa). A control box is provided with the blower module. It is located inside the air handler. Other controls include a 24-volt transformer and the necessary blower relays. All connections are made to terminal blocks. The most convenient and simplest way to achieve constant ventilation with the Unico System is to use the ACB (Advanced Control Board). The ACB can be used with both standard three-speed and the two-speed MP motors and is suitable for use with just about everyconfiguration.

Cabinet Construction
The cabinet is fully insulated with closed cell insulation. There is no exposed fiberglass inside the cabinet. The cabinet is constructed of 22 gauge (0.7-mm) galvanized steel with removable access panels on both sides for ease of service.

Additional Information

SKU M1218
Manufacturer Unico
Price 933.45
Cost No
Cooling Range (BTU/h) No
Dimensions (HxWxD) (Indoor) No
Auto Restart No
SEER (BTU/hW) No
Plasma Filter No
Net Weight (Indoor) lb. No
Indoor Unit No
Outdoor Unit No
BTU No
Rated Capacity (BTU/h) No
Dimensions (HxWxD) (Outdoor) No
Net Weight (Outdoor) lb. No
Features No
Model (Indoor) No
Model (Outdoor) No
Refrigerant No
BTU Input No
BTU Output No
Efficiency AFUE (%) No
Application No
Fuel Type No
Heat Exchanger Type No
Vent Size (Inch) No
Vent Material No
Modulating No
Dimensions (HxWxD) Inch No
Wall Hung? No
Warranty No
Energy Star Rated No
Frost Control No
Sleep Timer No
Inverter Technology No
Air Filter No
Optional Wall Thermostat No
Noise Level Indoor dB<br>(Hi / Med / Low / Quiet) No
Noise Level Outdoor dB No
Heating Range (BTU/h) No
Conn. Pipe Diameter (Inch) No
Fuse Size (A) No
Air Circulation (Hi / Med / Lo) CFM No
Voltage (V) No
Lowest Operating Temp. (Cooling) No
Lowest Operating Temp. (Heating) No
Moisture Removal (PT/h) No
Vent Type No
Motor HP No
Air Flow CFM (cubic ft/min) No
Air Temp Rise (?F) No
Max Mounting Height (Ft.) No
Heat Throw (Ft.) No
Residential CSA Approved for US & Canada No
Commercial CSA Approved for US & Canada No
Power Exchauster No
High Limit Safety Control No
Pressure Switch No
Flame Roll-Out Safety Switch No
Direct Spark Ignition No
Intermittent Pilot Ignition No
Aluminized Steel Heat Exchanger No
Tubular Heat Exchanger No
Aluminized Steel Burner No
Capacity (gal.) No
Diameter (Inch) No
Height (Inch) No
Boiler Supply/Return (Inch) No
Domestic Inlet/Outlet (Inch) No
GPM at 35°F Rise No
GPM at 75°F Rise No
Depth (Inch) No
Length (Inch) No
Number of Panels No
Composition No
Cooling Capacity No
Pad Size No
Blower Cooling Capacity Up To No
Blower Type No
Configuration No
Electric Heat Capabilities (Optional) No
Maximum CFM No
Plenum Opening Height (Inch) No
Plenum Opening Width (Inch) No
Heat Capacity No
TXV Required No
Supply Air Opening Size (Inch) No
Qualifies for Tax Credit? No

Contact Us

Contact Information

Write Your Own Review

You're reviewing: Unico M1218 1 to 1-1/2 Ton Air Handler - Blower Only (Standard)

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Price
Value
Quality
PayPal BillMeLater Discover Visa Mastercard AmEx PayPal